|
|
|
|
| Category:
Business & Industrial
/
Electrical & Test Equipment
/
Test Equipment
/
Spectrum Analyzers
|
 |
| Start Price: |
USD 2,350.00 |
Click Here
to See More
|
| Current Price: |
USD 2,350.00 |
| Reserve Price: |
- |
| Time Left: |
- |
| Bid Count: |
0 |
| Buy It Now Price: |
USD 2,450.00 |
| Start Time: |
11/13/2008 |
| End Time: |
11/20/2008 |
| Location: |
Kearneysville, West Virginia |
|
Hewlett-Packard 8569B 10 MHz to 22 GHz Microwave Spectrum Analyzer High performance and simple operation are combined with unique microprocessor-controlled capabilities in the HP 8569B Microwave Spectrum Analyzer. Excellent sensitivity and internal preselection assure the wide, spurious-free measurement range necessary for production applications, while the digital display and coupled controls speed measurement routines. The internal frequency range of 10 MHz to 22 GHz is extended using external mixers: to 40 GHz in two bands with the HP 8569B Option E02; to 71 GHz with other HP 11971 series mixers; and to 115 GHz with other commercially available mixers. For semi-automatic operation, connect a desktop computer to the HP 8569B via HP-IB to allow access to the displayed trace data and the control settings necessary to analyze or record measurements, or display operator messages and prompts on the CRT. Direct, hard copy output to a digital plotter is possible without the need of a controller or any programming. Wide Range of Signal Resolution Optimum resolution is possible for a wide range of signal characteristics with ten IF filters available from 100 Hz to 3 MHz. Fully automatic stabilization in narrow spans reduces residual FM to allow accurate measurements of closely spaced signals using the narrow bandwidths. The wide 1 and 3 MHz resolution bandwidths allow fast sweeps in wide spans and increased dynamic range for pulsed RF applications. All resolution filters are Gaussian-shaped for repeatable measurements, faster undistorted sweeps, and best pulse -response. High Accuracy and Wide Dynamic Range Absolute signal levels from -123 to +30 dBm are easily and accurately measured using IF substitution because the HP 8569B displays the reference level value-directly on the CRT above the graticule. Damage to the mixer is prevented for signal levels of +30 dBm with a built-in limiter below 1.8 GHz and a preselector from 1.7 to 22 GHz. The internal preselector also ensures maximum use of this wide measurement range by reducing internal distortion products as much as 120 dB. In addition, flat frequency response ensures accuracy for relative as well as absolute power measurements. Convenient Operation with Digital Display Preset the HP 8569B to the color-coded, "basic operation" settings and use the coupled controls to make most measurements in three easy steps: tune to the signal, select a span and raise it to the reference level. While in the AUTO sweeptime position, a calibrated amplitude display is ensured. However, the microprocessor also monitors manually-selected sweeptimes and displays a warning if the sweep speed chosen is too fast for calibrated measurements. Signals are displayed on either of two independent, digitally stored traces with all major control settings annotated above the graticule area. Display processing capabilities include Max Hold, digital averaging and trace normalization for extended measurement capability. HP-lB Includes Direct Plotter Control A hard-copy record of the displayed traces, control settings and graticule can be made on a digital plotter via HP-IB quickly and simply using the HP 8569B's front-panel pushbuttons without need for a controller. For maximum capability, attach a controller to the HP 8569B to read the trace data and control settings for a measurement analysis or recording on tape. Also, you can illustrate the test parameter for each measurement with display lines and instruct the operator with messages on the analyzer CRT. The controller can verify correct control settings before taking the test data or going on to the next step. Performance Characteristics Input Impedance 50 ohm Minimum Frequency 10 MHz Maximum Frequency 22 GHz Zero Span No Minimum Span 1.7 Hz Maximum Span 22 GHz Minimum Sweep Time 2 us Maximum Sweep Time 10 s Minimum Resolution Bandwidth 100 Hz Maximum Resolution Bandwidth 3 MHz Resolution Bandwidth Steps 1/3/10 Maximum Single-Side-Band Noise 75 dBc/Hz Maximum Safe AC Input 30 dBm Minimum Displayed Average Noise -113 dBm Maximum Displayed Average Noise -90 dBm Maximum Amplitude Uncertainty 0.15 % Connector type (main signal) Type-N(f) Probe Power No Noise Source Driver No A fairly nice unit with a copy of the op manual, pull out reference, a new calibration (NIST traceable with cert.) prior to shipping and a 30-day warranty. For complete terms & fine print click here I am a Trading Assistant.I can sell items for you? --> Powered by eBay Turbo ListerThe free listing tool. List your items fast and easy and manage your active items.
Place a Bid!
|
HOME
|
|