|
|
|
|
| Category:
Business & Industrial
/
Industrial Supply & MRO
/
Pumps & Plumbing
/
Pumps
/
Vacuum
|
 |
| Start Price: |
USD 29.99 |
Click Here
to See More
|
| Current Price: |
USD 29.99 |
| Reserve Price: |
- |
| Time Left: |
- |
| Bid Count: |
0 |
| Buy It Now Price: |
USD 39.99 |
| Start Time: |
9/1/2008 |
| End Time: |
9/8/2008 |
| Location: |
Minneapolis, Minnesota |
|
VACUUM PUMP 16MF CAP FILTER 1/6HP Motor 115VAC CORD PLUG TESTED and ready to run and Dry Plastic for Molding same as other Gast Vacuum Pumps. This smaller capacitor drops the watts and the heat. Vacuum Pump with Piston and Reed Valves so is Oil Less and gives you 25 inches of mercury vacuum (84650 pascals) tested on a vacuum gauge at 1,200 cubic inches per minute. Buy Now gets a 6mm "T" quick release fitting, hose, and 24vdc Vacuum On/Off Valve with adjustable bypass needle value. This allows you to keep a light vacuum on then full vacuum on demand. 115VAC 1,600 RPM 1/6HP single phase motor you get over 1,200 vacuum cycles per minute. Includes the insulated and wired 16mf capacitor for high torque starts, and inline air filter, and an extra timing belt to power other devices. This includes the 115VAC line Cord and plug wired and tested like Gast Vacuum pumps ready to run. There is no exposed wires, so there is no shock hazard. Motor is tested on a Power Factor Meter. As a Vacuum Pump, the motor operates at about 80 watts 0.6 Power Factor. The motor can also handle a heavy load as the label describes, 1/6 horsepower and over 120 watts. The motor is 1600 RPM and the piston is 1.1" diameter with a .8 inch stroke. Pi r squared is .945 inches times .8 equals .75625 cubic inches times 1600 equals 1,210 cubic inches per minute. Works great to remove bubbles from glue, expand marshmallows (tornado demonstration), dry bagged food, use as a hold down fixture on work pieces, to dry molding plastic better than heating, store vacuum in a big tank, and many other applications. Also click on cb4u1 for more in my new ebay store.
Place a Bid!
|
HOME
|
|